• 产品
1 / 1
发布时间:2019-07-11浏览38次
详细说明:

Fuchs Plantohyd 15 S

是一种环保润滑和液压油

基于合成酯(HEES)的环保液压和润滑油,可快速生物降解。经合组织301 B> 60%,获得欧洲生态标签(EEL)

 

PLANTOHYD S系列的产品是环保型高性能润滑油
和基于特殊合成酯的液压油。它们可以在
-30°C到+90°C 的温度范围内普遍使用,并且根据OECD 301 B测试可快速生物降解。
PLANTOHYD S系列的产品被授予欧洲生态标签EEL。它们基于> 50%的可持续原材料。

应用

PLANTOHYD S系列产品是基于
可持续原材料(> 50%)的合成,快速生物降解油。它们特别适用于移动式和
固定式液压系统的应用
,建议使用符合ISO 15380 标准的快速生物降解液压油,特别是在
由于泄漏而对地面,地下水或地表水造成环境危害的情况下(建设,水资源管理,农业,林业)。
如果更换PLANTOHYD S系列产品,则
必须遵守ISO 15380标准更换流体的指导原则。

产品规格

PLANTOHYD S系列产品满足或超过以下要求:

 

?ISO 15380:HEES 
?欧洲生态标签(EEL)(Euro Margerite)

优点

?基于可持续的原材料,> 50%
?良好的防腐蚀性
?符合OECD 301 B标准,可快速生物降解> 60%
?多种特性(品种合理化)
?优异的润滑性能
?极佳的粘度温度特性
?良好的低温性能
?高的剪切稳定性
?自然清洁能力
?高老化稳定性
?优异的抗磨损性
?良好的材料兼容性

FUCHS PLANTOHYD 10S FUCHS PLANTOHYD 22S  环保HEES液压油润滑油合成酯

 

图环保HEES液压油润滑油合成酯

 

它已被公认为现在的年数,矿物油基润滑剂的使用带来了一定的环境风险。泄漏,排放和泄漏处理液压油时,导致直接污染周围环境,从而。这一事实LED福斯迅速发展的可生物降解的润滑油以植物油和合成酯。

 

该PLANTOHYD的系列产品是基于合成酯。他们代表了一种环境友好的替代矿物油型液压油,可作为HEES流体分类根据ISO / CD 6743-4。

 

的优点是plantohyd:

 

快速生物降解(大于90%的14天内,根据cec-l-33-a-93)

 

德国水危险等级WGK 0,即一般不危险的水

 

无毒无害,生理

 

不含重金属

 

良好的低温特性

 

优良的耐老化和氧化

 

优异的粘温性能由于其高自然VI

 

优异的抗磨损性能

 

极端的剪切稳定性

 

快速的空气释放

 

小的发泡

 

不溶于水

 

良好的抗乳化性能。适用于水箱的温度范围从- 35°C + 90°C

 

PLANTOHYD的产品完全兼容通常在液压系统的所有材料。在这些产品中使用的基础油是无毒的。流体无重金属和氯代化合物。

 

应用:

 

PLANTOHYD的液压油可以在所有液压和一般的润滑系统中普遍使用。它们是适用于所有移动和固定式液压系统。这些产品应始终使用,每当有泄漏或溢出的土壤或水的污染危险。此类事件发生的大的潜力是在建设,水利,农业和林业产业。从一些知名厂商的认证已经发布。PLANTOHYD小号的产品给他们多特征的高粘度指数。

 

我们建议的相容性和这些产品与矿物油基液压油的相容性,应检查在个案基础上。在ISO / CD经合组织表示,矿物油的残留量应保持在低限度,冲洗前加气站。兼容坦克内部装修应选用。漆不2部分的环氧树脂系统可以显示抵抗力差的矿物油和合成酯。在一般情况下,我们推荐使用不锈钢罐。”免费”的金属,例如从焊点锡或锌镀锌组件应尽可能避免。过滤系统也应该与合成润滑油兼容。

 

这些液体强大的清洗效果可以去除大量的灰尘和污染物,这反过来,过滤器,缩短寿命。系统的过滤器应清洁或更换后plantohyd美国使用的ISO / CD的生态准则也应遵守的周。为了保持很好的可靠性,任何水已在已较长时间的停机,系统收集应排水。水或潮湿的问题如果能过滤或干燥设备是安装在油箱呼吸器降低。据经合组织的ISO / CD,在使用过程中的水含量应保持在0.1%以下。ISO VG 10到22流体弹性体的相容性测试应该执行。

 

我们的应用工程师将高兴地告诉你:

 

这些产品的经验

 

应用的可能性40材料的相容性

 

转换程序

 

关于产品和服务设施的计划。

 

FUCHS PLANTOHYD S

Print

Environmentally Friendly HEES Hydraulic Fluids and Lubricating Oils Based on Synthetic Esters

Diagram 
Environmentally Friendly HEES Hydraulic Fluids and Lubricating Oils Based on Synthetic Esters

It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions and spillages when handling hydraulic fluids lead to direct pollution of the surroundings and thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils and synthetic esters.

The PLANTOHYD S series of oils are based on synthetic esters. They represent an environmentally friendly alternative to mineral oil-based hydraulic oils and can be classified as HEES fluids according to ISO/CD 6743-4. 

The advantages of PLANTOHYD S are: 

  • Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93) 

  • German Water Hazard Class WGK 0, i.e. generally not hazardous for water 

  • Non-toxic, physiologically harmless 

  • Free of heavy metals 

  • Good low-temperature characteristics 

  • Excellent resistance to ageing and oxidation 

  • Excellent viscosity-temperature behaviour because of their high natural VI 

  • Excellent anti-wear properties 

  • Extremely shear-stable

  • Rapid air release 

  • Minimal foaming 

  • Insoluble in water

  • Good demulsibility characteristics. Applicable at tank temperatures ranging from - 35 °C to + 90 °C


PLANTOHYD S products are fully compatible with all materials usually found in hydraulic systems. The base fluids used in these products are non-toxic. The fluids are free of heavy metals and chlorinated compounds. 

Application:

PLANTOHYD S hydraulic oils can be used universally in all hydraulic and general lubricating systems. They are suitable for all mobile and stationary hydraulic systems. These products should always be used whenever there is a danger of soil or water pollution following a leak or spillage. The greatest potential for such occurrences are in the construction, water, agricultural and forestry industries. Approvals from a number of well-known manufacturers have been issued. The high viscosity index of PLANTOHYD S products give them multigrade characteristics. 

We recommend that the miscibility and compatibility of these products with mineral oil-based hydraulic oils should be checked on a case-by-case basis. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as synthetic esters. In general, we recommend the use of stainless steel tanks. "Free" metals, e.g. tin from soldered joints or zinc from galvanized components should be avoided if possible. Filter systems should also be compatible with synthetic ester fluids.

The powerful cleaning effect of these fluids can dislodge large amounts of dirt and contaminants and this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOHYD S. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering or drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %. For ISO VG 10 to 22 fluids elastomer compatibility tests should be performed. 

Our application engineers will be glad to advise you on: 

  • Experiences with these products 

  • Application possibilities 40 Material compatibility 

  • Change-over procedures

and service facilities regarding PLANTO products.


相关分类:
深圳市孚牌润滑油有限公司联系方式:
联系人:
林生
公司电话:
联系手机:
13590377048
所在地:
深圳
详细地址:
深圳市光明新区白花第二工业区H栋
营业执照:
法人代表: